BECOME A DEALER
REQUEST A QUOTE

ACT 3-3H DUST COLLECTOR

With millions of CFM going through operating A.C.T. Dust Collectors every day worldwide, we have experience with applications in many industries!  Custom designed and built systems are common, and our engineering team can help find the dust collection system that's right for you.

Dirty air from the dust source enters the A.C.T. dust collector at the top of the main housing. There are inlets on the roof and optional inlets on the front for the most efficient connection. As air enters the dust collector, dust accumulates on the outside of the filters as air is drawn through the high-efficiency media. The air flowing down through the system greatly assists the fallout of dust into the hopper where it is discharged. When the pulse clean system activates and accumulated dust is released from the cartridges, the air flowing downward through the collector assists dust fallout again. This avoids dust from getting re-entrained and accumulating on the filter again. Systems with vertical filters — with air entering from the side or below — struggle to avoid dust getting picked back up in the airstream or "re-entrained."

JK010824-01 (ACT 3-3H) CGI
JK010824-01 (ACT 3-3H) CGI

Applications:

MetalWorking
Weld Smoke & Fumes
Blasting
Plastics

Overview

Advantages of the ACT 3-3h

The ACT 3-3 is a compact dust collector with a small footprint for applications including metalworking, weld smoke and fumes, blasting, plastics and many more. Typically, the ACT 3-3 would be found collecting dust and debris for a smaller area in a facility.

The downward airflow technology of this horizontal cartridge style dust collector, maximizes the airflow in the collector to assist with dust separation. The 762 square feet of media in the ACT 3-3 will help to ensure the dust collection system is operating at optimum performance.

ACT 2-2DD
ACT 2-2H

ACT 3-3h Maintenance

When this dust collection system was designed, maintenance was top of mind. Our cartridge dust collectors are easy to maintain because of the following standard features:

  • Automatic Venturi-Assisted Pulse Filter Cleaning System
  • ACTion-Lock Quick Release Filter Doors
  • Ease of Access to Filters

This ACT 3-3H dust collection system holds (3) cartridge filters and comes standard with our A.C.T. Nano-Elite Nanofiber Cartridges. Our cartridge dust collectors are built to have a low total cost of ownership.  Because our dust collectors take standard filters, the cost of replacement filters is much lower than systems that come with custom sized or shaped filters. It is important to consider filter replacement cost at the time of purchase.

ACT Advantage

Downward Airflow Graphic Gray

DOWNWARD FLOW TECHNOLOGY

Dirty air from the dust source enters the A.C.T. dust collector at the top of the main housing. There are inlets on the roof and optional inlets on the front for the most efficient connection. As air enters the dust collector, dust accumulates on the outside of the filters as air is drawn through the high-efficiency media. The air flowing down through the system greatly assists the fallout of dust into the hopper where it is discharged. When the pulse clean system activates and accumulated dust is released from the cartridges, the air flowing downward through the collector assists dust fallout again. This avoids dust from getting re-entrained and accumulating on the filter again. Systems with vertical filters — with air entering from the side or below — struggle to avoid dust getting picked back up in the airstream or “re-entrained.”

ACT Filter B

HIGH-EFFICIENCY NANO-ELITE CARTRIDGE FILTERS

Your A.C.T. dust collector comes standard with industry-best A.C.T Nano-Elite media. These feature a MERV 15 efficiency rating for effective collection of extremely fine dust, smoke and fume, removing 99.9% of particulate from the air. The cleaned air is then directed to the location of your choice: either returned to your facility or exhausted to the environment.

Quick Access Graphic Gray

QUICK-LOCK EASY ACCESS FILTER DOORS

The patented door design of A.C.T. dust collectors is simple, fast and secure. The cast aluminum handle locks the door shut against the dust collector. The heavy-duty cross-rod and brackets on the dust collector and cam are all stainless steel. Knobs, hinges, springs, threads and wasted time are eliminated. Lift the handle and door comes off. Set the cross-rod in the brackets, lower the handle and it’s locked securely. Click Here to watch the video.

filter-door@2x

EXTERIOR RAIL CARTRIDGE SUPPORTS FOR UNOBSTRUCTED PULSE

Inside the A.C.T. dust collector, the design continues to work. Two rails support the cartridge filters from the front to the back of the housing, eliminating the need for interior yoke support frame cantilevered from the collector tube sheet. The pulse clean system is unobstructed inside the filter for maximum effectiveness.

Pulse-Clean-1@2x

PREMIUM GOYEN DIAPHRAGM VALVES AND ELECTRIC SOLENOIDS

Get behind the system, and the working end of the A.C.T. dust collector is equipped for any requirement. Goyen diaphragm valves and electric solenoids are the industry standard. Coupled with Dwyer Instruments digital, solid-state pulse control, complete with on-board pressure switch, you can control on-line, on-demand and downtime cleaning. All this is enclosed in a weatherproof housing for reliable operation.

Venturi Assisted Graphic Gray

HEAVY CONSTRUCTION HOUSING WITH VENTURI ASSISTED CLEANING

The main housing of your A.C.T. dust collector is 7 and 10 gauge, all-welded steel. Systems with bolted panel construction can leak over time, so the housing of the A.C.T dust collector is fabricated with continuous, welded seams. Behind every row of two filters is a venturi for maximum performance on the pulse cleaning.

Weld Smoke application - INSTALLED@2x

FIT AND FINISH

With hundreds of A.C.T. dust collectors manufactured and installed, every serial number is a statement of quality. Lifting lugs are engineered to the correct lifting angle and formed doors for maximum rigidity, coupled with deep one-piece gaskets, maintain the seal. Angle iron support structure and base plates are pre-punched for easy installation. A fastener kit is included with Grade 5, zinc-plated fasteners. A premium blast, prime and paint process ensures the system will remain in excellent cosmetic condition for many years.

Resources

Resources

At A.C.T. Dust Collectors, we do more than sell dust collectors.  We want to be your number one resource for all your dust collection needs.  From our helpful glossary of terms to our on-demand webinars and videos – you can find it all right here.  Manuals and brochures for all of our models of dust collectors are also accessible in downloadable formats.

 

Related White Papers:

Related Case Studies:

Related Blog Posts:

 

Standard Features

Standard Features

With millions of CFM going through operating A.C.T. Dust Collectors every day worldwide, we have the solution to every application. Custom designed and built systems are common, and our engineering team can help find the dust collection system that's right for you.

Standard Features
Standard Features
Collector Design STD OPT
Mild Steel Construction  
Venturi-Assisted Pulse Filter Cleaning System  
ACTion-Lock Quick Release Filter Doors  
Inlets (2) Available  
A.C.T. Nano-Elite Nanofiber Cartridges  
Dust Drawer/Tray Bottom Material Outlet  
Stainless Steel Construction  
High Temperature Construction  
Explosion Protected Models  
Direct Drive Fans  
Chamber and Exhaust Silencers  
Air Management Modules  
Steep-Sided Hopper  
Multi-Module Hopper for Single Outlet  
Service Platform (OSHA compliant)  
Sprinkler Coupler  
Alternate Filter Media Options  
After Filter Housing  
HSPA/ASHRAE Filters  
Damper Pack  
Bag-In/Bag-Out Kit (Filter & Discharge)  
High Temp (MERV 13) Filter  
HEPA/ASHRAE Afterfilters  
Paint System STD OPT
Primed and Painted Interior  
Multi-Coat Paint Finish  
Custom Color  
Epoxy Coating  
Hopper Discharge STD OPT
Drum Cover and Hose  
Slide Gates  
Rotary Valves and Transitions  
Screw Conveyors  
Electrical Controls, Gauges & Enclosures STD OPT
Control Box w/Digital Timer in NEMA 4 Enclosure  
Control Panel with Magnetic Starter and Digital Timer Control  
Control Panel with Variable Frequency Drive (VFD) and Digital Timer Control  
Custom Panels  
Solenoid Heater Kit  
Warranty STD OPT
10-Year Warranty  

Dimensions

Dimensions

With millions of CFM going through operating A.C.T. Dust Collectors every day worldwide, we have the solution to every application. Custom designed and built systems are common, and our engineering team can help find the dust collection system that's right for you.

Dimensions
Dimensions
Model Height Width Depth # of Filters Filter Area
ACT 2-2DD 70 26 56 2 508
ACT 2-2H 118 50 56 2 508
ACT 2-4 127 40 61 4 1,016
ACT 2-8 127 40 87 8 2,032
ACT 2-12 127 60 87 12 3,048
ACT 2-24 127 120 87 24 6,096
ACT 3-3DD 95 26 56 3 762
ACT 3-3H 141 50 56 3 762
ACT 3-6 146 40 61 6 1,524
ACT 3-12 146 40 87 12 3,048
ACT 3-18 146 60 87 18 4,572
ACT 3-24 146 80 87 24 6,096
ACT 3-36 146 120 87 36 9,144
ACT 3-48 146 160 87 48 12,192
ACT 3-54 146 180 87 54 13,716
ACT 3-72 146 240 87 72 18,288
ACT 4-16 164 40 87 16 4,064
ACT 4-32 164 80 87 32 8,128
ACT 4-48 164 120 87 48 12,192
ACT 4-64 164 160 87 64 16,256
ACT 4-80 164 200 87 80 20,320
ACT 4-96 164 240 87 96 24,384
ACT 4-112 164 280 87 112 28,448
ACT 4-144 164 360 87 144 36,576
ACT 5-20 178 40 87 20 5,080
ACT 5-40 178 80 87 40 10,160
ACT 5-60 178 120 87 60 15,240
ACT 5-80 178 160 87 80 20,320
ACT 5-100 178 200 87 100 25,400

Replacement Filters

OEM Replacement Filters

A.C.T. Nano-Elite high efficiency cartridge filters remove 99.9% of the particulate from the air stream. They carry a MERV 15 rating (best in the industry). The cleaned air is then directed to the location of your choice, either returned to the facility or exhausted to the environment.

DCF22611 NANO-ELITE FILTER Button 2024DCF22711 NANO-ELITE FR FILTER Button 2024

 

 

Request a Quote