An international tire manufacturer needed to improve air quality and emissions control during a rubber production process. At a key stage in manufacturing, airborne compounds and odors were being released, creating challenges for both workplace conditions and environmental control.
A.C.T. Dust Collectors provided a solution designed to capture particulate before downstream VOC treatment, supporting a more effective overall pollution control system.
During rubber manufacturing, certain processes can release airborne compounds, particulate, and odor into the environment.
In this case:
Without proper filtration, particulate can impact the performance and efficiency of VOC treatment systems.
After evaluating the application, A.C.T. Dust Collectors recommended:
This system was designed to:
By removing particulate before the air reached the thermal oxidizer, the system helped ensure more effective downstream treatment of VOCs and odors.
Learn more about MERV ratings here.
The dust collection system was installed as part of a larger pollution control strategy.
This configuration ensured that both particulate and gaseous emissions were addressed within the process.
The system was installed outside of the facility and integrated into the existing process.
The customer reported that the system performed reliably and met the needs of the application.
In applications involving VOC treatment, particulate removal plays a critical role.
Pre-filtration helps:
A properly designed dust collection system ensures that emissions control systems operate as intended.
If your process involves rubber manufacturing, VOC control, or emissions management, A.C.T. Dust Collectors can design a system to improve air quality and support your operation.
Contact our team to discuss a solution for your facility today.
Rubber manufacturing processes can produce airborne particulate, compounds, and odors. These emissions may include fine dust and volatile organic compounds (VOCs), which require proper filtration and treatment to maintain air quality.
A dust collector removes particulate from the airstream before it reaches VOC treatment systems such as thermal oxidizers. This pre-filtration step helps improve the efficiency and performance of downstream emissions control equipment.
A regenerative thermal oxidizer (RTO) is a system used to remove volatile organic compounds (VOCs) and odors from industrial exhaust streams by using high temperatures to break down pollutants.
Cartridge dust collectors are commonly used in manufacturing because they provide high-efficiency filtration for fine particulate. They are compact, effective, and suitable for applications where consistent air quality and system integration are required.